I just put on my rebuilt wiper motor, and I have problems. The low speed works but is very slow, the high speed just stops. The intermittent is slow as well. I've checked the grounds on the wiring, all seems good. I have 12v on all settings at the motor wiring.

Did I get a bad motor or am I missing something?? I think it's a bad motor but I thought I'd ask before I go calling the company and find out it was something else.

Thanks,
Bill

Submitted by NW41-38077J on Wed, 10/24/2007 - 04:00

Thanks Bill,
I'll write that one in my book. Ray Papineau JDRC/NWA
1990 XJS V-12 CONV.
1990 XJS V-12 COUPE
1988 XJS V-12 CAB.
1988 XJS V-12

Submitted by buck_1one@yahoo.com on Tue, 08/21/2007 - 14:55

Even though I didn't get any responce to my question, I did find out what the problem was. The rebuilt wiper motor had a bad ground connection, due to a reused wire connection.

Submitted by buck_1one@yahoo.com on Fri, 08/17/2007 - 21:48

Something I forgot to add before, but if you stop the wipers in the middle of a stroke they just stop. They don't go back to the park position. I don't know if this is normal or not.

Thanks again
Bill